GiESCO 2019 banner
IVES 9 IVES Conference Series 9 GiESCO 9 Using remotely sensed (UAV) and in situ field measurements to describe grapevine canopy characteristics

Using remotely sensed (UAV) and in situ field measurements to describe grapevine canopy characteristics

Abstract

Context and purpose of the study – Row orientation and canopy management are essential for high quality grapevine production. Microclimatic conditions of the leaves and fruits can be influenced by the canopy geometry. Remote sensing is a very promising tool to describe vegetative growth and physiological behavior of vineyards. However, the correlation between remotely sensed data and in situ field measurements has been described scarcely in the scientific literature so far. The aim of the study was to correlate remotely sensed data obtained with Unmanned Aerial Vehicle (UAV) with in situ field measurements to describe canopy structure.

Material and methods – The experiment has been established in Borota (Hajós-Baja wine region, Hungary) in 3 repetitions with ‘Cserszegi fűszeres’ (Vitis vinifera L.) cultivar and with two row orientations (NE-SW and NW-SE) in 2016. Two canopy managements were applied: Sylvoz cordon (S; VSP) and Modified Sylvoz cordon (MS; shoots not positioned into the wires). The presented data have been collectedon 16 August 2017. Vegetative performance of the canopies has been investigated with remote sensing technique (UAV), mounted with a Parrot Sequoia multispectral (through 4 color channels: Green, Red, Red edge and NIR) and Sony RGB camera. The drone was flying at the altitude of 120 m, NDVI index map was created with the help of Pix4D, and the 3D NDVI figure was generated with MATLAB software. Canopy size and structure were evaluated by using a Smart phone application, i.e. VitiCanopy software (De Bei et al., 2016) and the Point Quadrat (PQ,) method (Smart and Robinson, 1991). PQ data were recorded as leaf layer number, percentage of interior leaves, average canopy thickness.

Results – The photosynthetically active canopy surface proved to be larger for Modified Sylvoz cordon, which was well reflected inUAV NDVI and 3D NDVI data. Field measurements also support this observation. VitiCanopy LAI values clearlypresented this difference as well. Point Quadrat assessment drew attention to wider canopy and slightly higher interior leaves of MS cordon. Differences between row orientations need further refined studies. The MS system results in higher yield and needs less labour (only 2 mechanical trimming in the growing season) and in addition, seems to be more suitable for the desired wine style (fully aromatic fresh white wine) in the given terroir.

DOI:

Publication date: March 11, 2024

Issue: GiESCO 2019

Type: Poster

Authors

B. Bálo1, N. Szobonya1, B. Vanek2, Gy. Váradi 1, P. Bodor1, F. Firtha3, Cs. Koch4

1 Department of Viticulture, Faculty of Horticultural Sciences, Szent István University, Budapest, Hungary
2 Ventus-Tech Ltd., Budapest, Hungary
3 Department of Physics-Automation, Szent István University, Budapest, Hungary
4 KOCH Winery, Borota, Hungary

Contact the author

Keywords

Canopy structure, UAV, 3D NDVI, Smart phone application, Point Quadrat

Tags

GiESCO | GiESCO 2019 | IVES Conference Series

Citation

Related articles…

Effect of foliar treatment of methyl jasmonate and nanoparticles doped with methyl jasmonate on Monastrell grape skin cell wall

The use of elicitors to promote the biosynthesis of secondary metabolites in grapes has been tackled in several reports, however its study linked to nanotechnology is less developed.

Methyljasmonate versus nanomethyljasmonate: effect on monastrell nitrogen composition

The aim of this work was to evaluate the effect of preharvest application in Monastrell berries using two different types of applications: conventional treatments

Autochthonous yeasts: a microbiological tool to exalt the quality of the apulian sparkling wine

The selection, characterization, and recruitment of autochthonous yeast strains to drive the alcoholic fermentation process is a highly researched practice because it allows the differentiation of the organoleptic properties of wines, assuring process standardization, reducing fermentation times and improving the quality and safety of the final products [1, 2]. Sparkling wines are “special wines” obtained by secondary fermentation of the base wine. ​In the traditional method (Champenoise method), the re-fermentation takes place in the bottle after the addition to the base wine of the so-called tirage solution. This step, also known as prise de mousse, is followed by an aging period characterized by the release of compounds from the yeast cells that affect the organoleptic properties of the final product. The use of autochthonous yeasts as starter cultures for secondary fermentation is one of the recent innovations proposed to enhance and differentiate these wines’ sensory quality [3,4]. Apulia is the second Italian wine-producing region, and its productive chain is now going through a qualitative evolution by implementing the employment of innovative approaches to exalt the peculiar properties of regional wines.

Brettanomyces bruxellensis, born to live

The wine spoilage yeast Brettanomyces bruxellensis can be found at several steps in the winemaking process due to its resistance to multiple stress conditions. Among the resistance strategies, one could be the formation of biofilm, a lifestyle known to enhance persistence of microorganisms. In this study, we propose to characterize biofilm of B. bruxellensis in wine, especially through several microscopic analyses.

Bioprotective effect of non-Saccharomyces yeasts in wines made without SO2

The sulphur dioxide (SO2) is the most widely used additive in the wine industry because of its preservative action. However, in recent years the number of wineries that produce wines without SO2 has increased significantly because its allergenic character.