OENO IVAS 2019 banner
IVES 9 IVES Conference Series 9 OENO IVAS 9 OENO IVAS 2019 9 Chemical and Biochemical reactions, including grape and wines microorganisms impact 9 What is the fate of oxygen consumed by red wine? Main processes and reaction products

What is the fate of oxygen consumed by red wine? Main processes and reaction products

Abstract

Oxygen consumed by wine is used to oxidize sulfur dioxide and ethanol to form acetaldehyde wine oxygen consumption rate (OCR) was negatively correlated with the initial acetaldehyde level. Experiences carried out at 25 ºC with red wines have demonstrated that after consuming a large amount of O2, some young wines did not form acetaldehyde. However, acetaldehyde level increased in aged wines. Higher acetaldehyde accumulation in aged wines can be explained by Aldehyde Reactive Polyphenols (ARPs) smaller amounts, because of their lower reactive potential due to high O2 exposure. Models characterized ARPs as anthocyanins, flavonols, tannins and flavanol-anthocyanins adducts. These ARPs should be closely related to wine aging potential by measuring acetaldehyde consumption rate (ACRs) and/or the maxima amounts of acetaldehyde each wine can consume. 

The main goal of this work was to find a new polyphenol index which should be linked to wine oxygen consumption kinetics. It could indicate the maximum oxygen level that a wine can consume. As well as, elucidate if acetaldehyde is the reactive species with ARPs, but one of its radical precursors in the Fenton reaction. 

Three experiments were prepared in anoxia followed by total acetaldehyde determination by using HPLC: 1) wines spiked with 30 and 300 mg/L of acetaldehyde and incubated at 25, 45 and 70 °C; 2)synthetic wines spiked with 15 to 120 mg/L of acetaldehyde and polyphenol extracts; 3) synthetic matrices filled with malvidin-3-O-glucoside, catechin and a mix of both, which were exposed to: a) 8 mg/L O2 to form acetaldehyde in situ or b) to anoxia and spiked acetaldehyde (11 mg/L). 

Several wines consume acetaldehyde at different rates, which are particularly imprecise at low temperatures. This makes impractical the use of ACRs as an index to categorize wine polyphenolic composition by defining a discrete ARP category. ACRs are too complex, showing a high dependence order towards acetaldehyde level and an equilibrium concentration. Such concentrations were found to depend on the previous acetaldehyde uptake by the polyphenolic fraction, but it was too imprecise to take clear conclusions. In any case, measured ACRs are smaller than expected attending to oxygen consumption kinetics and acetaldehyde accumulation rates. No significant differences were found when comparing the acetaldehyde formed in situ or when acetaldehyde was spiked. 

Results show that oxygen consumed by wine is used to oxidize SO2, ethanol and at least 50 % to oxidize ascorbic acid, cysteine, glutathione, H2S, thiols, methionine and phenols. 

This work has been funded by the Spanish Ministry of Economy and Competitiveness (Spanish FPI Program AGL2014-59840-C2-1-R, AGL2017-59840), by Diputación General de Aragón (T53) and Fondo Social Europeo.

DOI:

Publication date: June 11, 2020

Issue: OENO IVAS 2019

Type: Article

Authors

Almudena Marrufo-Curtido, Elena Bueno-Aventín, Vicente Ferreira, Ana Escudero

Laboratory for Aroma analysis and Enology (LAAE). Instituto Agroalimentario de Aragón (ia2). Department of Analytical Chemistry. Associated unit to Instituto de Ciencias de la Vid y del Vino (ICVV-CSIC, UR, CAR) Universidad de Zaragoza.

Contact the author

Keywords

Oxygen, Acetaldehyde, Polyphenol index, Anthocyanins, flavonols, tannins and flavanol-anthocyanins adducts 

Tags

IVES Conference Series | OENO IVAS 2019

Citation

Related articles…

MOUSY OFF-FLAVOURS IN WINES: UNVEILING THE MICROORGANISMS BEHIND IT

Taints and off-flavours are one of the major concerns in the wine industry and even if the issues provoked by them are harmless, they can still have a negative impact on the quality or on the visual perception of the consumer. Nowadays, the frequency of occurrence of mousy off-flavours in wines has increased.
The reasons behind this could be the significant decrease in sulphur dioxide addition during processing, the increase in pH or even the trend for spontaneous fermentation in wine. This off-flavour is associated with Brettanomyces bruxellensis or some lactic acid bacteria metabolisms.

Adapting Portuguese vineyards to climate change: impact of different irrigation regimes on phenolic composition

Climate change has led to increased extreme weather events, such as severe droughts and intense rainfall, with regions like Alentejo and Algarve in Portugal, being particularly affected.

Evaluation of mannoprotein formation by different yeast strains by enzymatic analysis of mannose and tribological estimation of astringency

A positive role of mannoproteins on wine stability and red wine mouth sensations has been widely described. Commercial mannoproteins are available and some yeast strains are offered with a higher formation of mannoproteins.

Impact of chitosan treatment on the physico-chemical features of a sangiovese red wine

Chitosan is gaining interest in red winemaking thanks to its ability to inhibit the development of Brettanomyces spp. yeast, or other undesired wine microbial threats. However, little is known about potential side-effects of its addition on the physico-chemical parameters of red wines.

Monitoring vineyard canopy structure by aerial and ground-based RGB and multispectral imagery analysis

Unmanned Aerial Vehicles (UAVs) are increasingly used to monitor canopy structure and vineyard performance. Compared with traditional remote sensing platforms (e.g. aircraft and satellite), UAVs offer a higher operational flexibility and can acquire ultra-high resolution images in formats such as true color red, green and blue (RGB) and multispectral. Using photogrammetry, 3D vineyard models and normalized difference vegetation index (NDVI) maps can be created from UAV images and used to study the structure and health of grapevine canopies. However, there is a lack of comparison between UAV-based images and ground-based measurements, such as leaf area index (LAI) and canopy porosity.